侵入气体沿井筒的上升规律研究

地层气体侵入井筒后形成气液两相流动体系,气体沿井筒向上滑脱运移,随着所受压力的降低其发展变化过程会很快,如果不及时处理就会演变为井涌、井喷,甚至井喷失控.因此,准确的预测侵入气体沿井筒的上升规律,有助于认识气侵发展过程,同时为现场采取井控措施提供理论依据,有效避免井下复杂事故.基于侵入气体沿井筒运动的力学特性,建立了气体的上升速度模型,模型模拟分析表明:地层渗透率越高、机械钻速越快、单位时间内侵入井筒的气体量越多、气体上升速度越快,井底压力波动越大;施加一定的井口回压可以有效抑制气体的膨胀运移.     

Determination of Polycyclic Aromatic Hydrocarbons in Mosses by Ultrasonic-Assisted Extraction and Gas Chromatography–Tandem Mass Spectrometry

A facile method for the determination of polycyclic aromatic hydrocarbons in mosses is reported using ultrasonic-assisted extraction and gas chromatography–tandem mass spectrometry. The efficiency of ultrasonic-assisted extraction and the reagents was optimized. Tandem mass spectrometry with selective reaction monitoring was used to enhance the selectivity to reduce matrix interferences and simplify the purification protocol. The detection limits were from 0.1 to 2.0?ng/mL. The linear calibration range was two orders of magnitude and the coefficients of linear correlation exceeded 0.9992 for all analytes. The relative standard deviations within 1 day and 3 days were less than 9.0%. Recoveries from 56.8 to 109.0% were obtained in fortified mosses. The rapid, low solvent gas chromatography–tandem mass spectrometry method was used to determine polycyclic aromatic hydrocarbons in mosses.     

Candida antarctica B Lipase-Loaded Microreactor for the Automated Derivatization of Lipids

A key bottleneck in the profiling of lipids is the multistep derivatization required prior to gas chromatography (GC) analysis. A single in-vial lipid derivatization and analysis may significantly minimize sample loss and improve analytical sensitivity. A cotton fiber-supported poly(glycidylmethacrylate-co-ethylene glycol dimethacrylate) polymer microbrush microreactor loaded with Candida antarctica lipase B was developed for the facile conversion of triacylglycerols into fatty acid ethyl ester derivatives for gas chromatograph–mass spectrometry (GC–MS) analysis. The polymer microbrush microreactor was fabricated in effort to provide efficient, simplified, cost effective, and high-throughput GC–MS determination of triacylglycerols. The polymer microbrush microreactor was used as an in-vial triacylglycerol transesterification platform, with economical sample consumption of less than or equal to 100?µL and significant reduction of reagents. To evaluate the polymer microbrush microreactor performance for lipids, a triolein standard and camelina oil triacylglycerols were quantitatively transformed into ethyl oleate and fatty acid ethyl esters, respectively, following a 3?h reaction time. The lipase-loaded cotton fiber-supported poly(glycidylmethacrylate-co-ethylene glycol dimethacrylate) polymer microbrush microreactors were reusable for up to five times for quantitative transesterification with minimal loss of lipase activity.     

O3 and SO2 sensing concept on extended surface of B12N12 nanocages modified by Nickel decoration: A comprehensive DFT study

Adsorption of SO₂ and O₃ molecules on pristine boron nitride (B₁₂N₁₂) and Ni-decorated B₁₂N₁₂ nano-cages has been systemically investigated through density functional theory (DFT) methods. Adsorption energies (thermodynamics), bond distances, charge analysis, dipole moments, orbital analysis and density of states are calculated by van der Waals DFT method (MPW1PW91) functional. The adsorption energies of O₃ and SO₂ on pristine B₁₂N₁₂ are about −143.8 and −14.0 kJ mol⁻¹, respectively. The interaction energies of O₃ and SO₂ with pristine B₁₂N₁₂ are indicative of chemisorption and physisorption, respectively. Ni-decorated B₁₂N₁₂ (Ni@BN) enhances adsorption of both O₃ and SO₂ species. The interaction energies for adsorption of SO₂ are about −166 and −277 kJ mol⁻¹ whereas the corresponding energies for O₃ are −362 and −396 kJ mol⁻¹ for configuration A and B, respectively. These observations show that functionalized B₁₂N₁₂ are highly sensitive toward SO₂ and O₃ molecules.     

Mean flow properties for equatorially trapped internal water wave–current interactions

The aim of this paper is to provide an analysis of the mean flow velocities, and the related mass transport induced by equatorially trapped internal water waves with a constant underlying current.     

Toward efficient catalysts for electrochemical CO2 conversion to C2 products

With impressive progress in carbon capture and renewable energy, carbon dioxide (CO₂) conversion into useful chemicals has become a potential tool against climate change. Electrochemical CO₂ conversion into C₂ products (ethylene and ethanol) is an especially economically promising approach and an active research area. Nonetheless, catalyst layer design for CO₂ conversion is challenging because of the complex CO₂-to-C₂ reaction pathways. In this review, we highlight key ideas in catalyst layer design for CO₂ conversion to C₂ in the past few years. We identify three fundamental principles to control catalyst selectivity—local CO₂ and CO concentration, local pH, and intermediate–catalyst interaction. To achieve these goals, we introduce design strategies for both catalytic materials and overall catalyst layer morphology.     

Relevance of gaseous flows in electrochemically assisted soil thermal remediation

Treatment of polluted soil is one of the priorities in the search of a more sustainable planet. Electrochemically assisted soil remediation has been considered a good option for removing organic contaminants contained in soil, including the removal of volatile organic compounds, associated with gaseous streams produced during the treatment. Also, recently, electrochemical gas treatment technologies have been appointed as promising for the treatment of volatile organic compounds. In this work, we review the current opinion about the most recent studies in both areas. The first section focuses on the production of gaseous compounds during soil remediation by conventional and electrochemical systems. The second section describes the recent progress in the integration of adsorption and absorption with electrochemical processes. Finally, we discuss the holistic application of assisted electrochemical technologies in soil remediation, considering also emerging processes recently published in the literature.     

Fluidization characteristics of sawdust in a cold flow fluidized bed

India has abundance of biomass such as rice husk, bagasse, wheat straw, sawdust etc. which is used as a main or auxiliary fuel in the fluidized bed combustor, gasifier and pyrolizer. Design of such fluidized bed equipments require the knowledge of minimum fluidization velocity (U_mf), complete fluidization velocity (U_cf) and transport disengagement height (TDH). The present work reports the fluidization characteristic, U_mf, U_cf and TDH of the individual size groups of sawdust and mixture thereof. The results indicate that the U_mf and U_cf have a tendency to increase with increase in particle diameter, however the TDH shows the reverse trend. The sawdust particle size of 925 and 1200 ​μm showed significant difference between their U_mf and U_cf, an essential parameter for controlled fluidization. Based on the experimental work new correlations for the prediction of U_mf, U_cf and TDH for sawdust sample are proposed. The proposed correlations of U_mf, U_cf and TDH are in good agreement with experimental values and the deviations found within the range of nearly ±10% for all the samples.     

Approximate analytic expressions for the diffusiophoretic velocity of a spherical colloidal particle

The general expression is derived for the diffusiophoretic velocity of a spherical colloidal particle of radius a in a concentration gradient of symmetrical electrolyte. On the basis of this expression, simple approximate analytic expressions for the diffusiophoretic velocity correct up to the order of 1/κa is derived, where κ is the Debye-Hückel parameter. It is found that the approximate expression correct to order unity can be applied for κa ≥ 50 with negligible errors, while the approximate expression correct to order 1/κa can be applied for κa ≥ 20 with negligible errors.